PANDHY’S™ COSMIX Derma Pin Pen

PANDHY’S™ COSMIX Derma Pin Pen

Treatment protocol

1. Thoroughly cleanse the face and neck and pat it dry.
2. Apply the COSMIX Time Transformer Silk Collagen on the treated area and keep re-applying it as you progress to all areas of the face and neck.  
3. Use the Derma Pin Pen for 15-20 minutes or until you reach all desired areas.
4. After the treatment mix the client’;s personalised COSMIX mask and apply it to the treated areas.

Important!

1. When you use the Derma Pin Pen stick to the “three-three principle” that is, do not stay on the same area for more than three seconds and do not go over it more than three times;
2. The nano chip is disposable and should be changed after each client.
3. After use, minimal redness, itching and irritation are normal for the next 3 hours.
4. After the treatment, it takes about 20 minutes for the opened channels of the skin to close. This is the time to apply any other treatment as well, but it is important not to apply make up in the next half an hour.
5. Be sure to choose suitable skincare products with reliable quality and safety. We recommend that you use only PANDHY’S™ products.
6. Always place the Derma Pin Pen flat, otherwise, the skincare liquid may flow into the instrument, damage machine parts; After use, throw away the nano chip head, and wipe the residual liquid off the device with a cotton pad.

Function

The nano pin chip uses high purity silicon that is carved with micro-and nano-technology. Each nanotip is less than 80nm and is only 1/1000 of the human hair. When the chip gently touches the skin, they form up to thousands of invisible channels, through these, the skincare products can be delivered into deeper layers of the skin safely and effectively. It raises the absorption of skin care products 10-20 fold.

How to use

1. Screw on the nano pin chip clockwise into the Derma Pin Pen
2. Long press “on/off” for 2 seconds to turn on the device, the red light indicates a high-intensity function.
3.   Short press “on/off” again, medium intensity is turned on, indicated by a green light.
4.   Short press “on/off one more time, low intensity is turned on, indicated by a blue light.
5.   Long press ”on/off”; for 2S to turn off the device.